IR Repeater
From SqueezeboxWiki
Contents |
Overview
(Deutsche Version IR Repeater)
IR commands captured by SB2/SB3/Transporter are sent to SlimServer which in turn sends the commands out through IR Blaster.
Note: This functionality is only available for SB2/SB3 and Transporter. SB Touch does not support it.
Features
IR Repeater should be able to repeat all remotes using a carrier frequency of about 36kHz to 40kHz.
Requirements
- SB2/SB3/Transporter
- IR emitter (inexpensive and available from Slim Devices or in Switzerland from K55)
- Firmware >= 29 (SB2/SB3) / any (Transporter)
- SlimServer >= 6.2.x
- IR Blaster plugin
Configuration / Usage
To use IR Repeater functionality check the IR Repeater checkbox in the IR Blaster settings page.
Links
http://winlirc.sourceforge.net
Technical
SlimServer does not 'interpret' the IR commands at all and you don't have to have a config file loaded. The IR commands are sent through IR Blaster as they arrive at SB2/SB3/Transporter.
Know limitations
Remotes not using a carrier frequency in the range of 36kHz - 40kHz are not repeatable:
- Bang Olufsen (uses about 455kHz)
- BeamIt (uses about 455kHz)